SpeedNeeds Diagnostics Index

Fuel

Fuel pressure, flow, pump behavior, delivery, injectors, regulation, and system design.

Command Center / Tools Library

Read the Privacy Policy.

Start with the symptom

Start from what the car is doing. Everything is still listed below, the way it was.

Starts, then dies, or long crank after it sits

Fuel pressure reads too high

Search

Direct Working Files

BundleLocked$29 founding
Fuel Bundle Size the fuel system to the power you are actually making, and prove it can feed the engine. $29 founding · $49 regular
ToolFREE
AFR Target Builder (Use Case) • SpeedNeeds tools/fuel/afr-target-builder-v2.html
Idle, cruise, and WOT AFR targets by induction, fuel, and vehicle use — with lambda conversion and safety notes.
ToolFREE
Boost Referenced Fuel Pressure Calculator V1 tools/fuel/boost-referenced-fuel-pressure-calculator-v1.html
Shows how boost raises rail pressure, reduces pump headroom, and changes injector differential pressure.
ToolFREE
Bsfc Fuel Demand Estimator V1 tools/fuel/bsfc-fuel-demand-estimator-v1.html
Estimate total fuel mass required from horsepower and BSFC. This is system demand — pumps, injectors, and lines all key off this number.
ToolLockedFuel Bundle, $19 founding
BSFC Reverse Reality Check tools/fuel/bsfc-reverse-reality-check-v1.html
If you know power and fuel flow, this backs into BSFC. Use it to catch bad injector data, wrong unit assumptions, or a tune that is richer than you think.
ToolFREE
E85 Blend Calculator (Tank Math) • SpeedNeeds tools/fuel/e85-blend-calculator-tank-math-v1.html
Tank math only: calculate how many gallons of pump E85 and gasoline to add to reach a target ethanol percentage. Includes validation & reality checks.
ToolFREE
E85 Stoich & Fueling Multiplier • SpeedNeeds tools/fuel/e85-stoich-fueling-multiplier-v1.html
Calculate blend stoich AFR from ethanol content and gasoline stoich, plus fueling multiplier and injector/pump percent increase vs gasoline.
ToolFREE
Excessive Fuel Pressure Classifier v1.0 tools/fuel/excessive-fuel-pressure-classifier-v1.0.html
Compare measured rail pressure to base spec and user tolerance to classify overpressure patterns for fuel pressure regulation diagnostics.
ToolFREE
Fuel Injector Size Calculator • SpeedNeeds tools/fuel/fuel-injector-size-calculator-v1.html
Compute required injector size from power, BSFC, injector count, duty cycle, and fuel pressure — or estimate supported HP from injector size. Shows lb/hr and cc/min with fuel density and pressure scaling.
ToolLockedFuel Bundle, $19 founding
Fuel Line Size & Pressure Drop tools/fuel/fuel-line-size-pressure-drop-estimator-v1.html
Estimate fuel feed-line pressure drop from flow, line ID, length, fittings, and filter restriction. Get a restriction verdict and recommended minimum feed/return sizes.
ToolFREE
Fuel Pressure Snapshot Logger (Prime/Crank/Run + Hold) tools/fuel/fuel-pressure-snapshot-logger-v1.2.html
Log fuel pressure at prime, crank, run, and hold. Includes a user-started hold timer and printable notes.
ToolFREE
Fuel Pump Command Logic Mapper tools/fuel/fuel-pump-command-logic-mapper-v1.2.html
Decision-support pre-test tool that maps who is allowed to command the fuel pump under the current condition.
ToolFREE
Fuel Pump Sizing Calculator • SpeedNeeds tools/fuel/fuel-pump-sizing-calculator-v1.2-2.html
Size your fuel pump(s) from horsepower, BSFC, fuel type density, pump count, and max pump duty. Outputs total fuel demand and recommended pump rating per pump in GPH and LPH.
ToolLockedFuel Bundle, $19 founding
Fuel System Headroom & Safe HP Checker tools/fuel/fuel-system-headroom-safe-hp-checker-v1.html
This tool exposes the weak link with margin. It compares pump capacity and injector capacity against your fuel demand, then gives you a Safe HP number that won't play games.
ToolFREE
Injector Duty Cycle and Pulsewidth Reality Check tools/fuel/injector-duty-pulsewidth-reality-check-v1.html
Prevents WOT peg, crappy idle, and data-limited tunes by showing what your injectors can actually do per cycle.
ToolFREE
Injector Flow Rate (lb/hr vs cc/min) — SpeedNeeds Tool tools/fuel/injector-flow-rate-lbhr-vs-ccmin-v1.2.html
Convert injector flow between lb/hr and cc/min with fuel density and optional pressure scaling. SpeedNeeds Tool.
ToolFREE
Injector Command Logic Mapper tools/fuel/injector-logic-mapper-pulse-command-v1.1.html
Decision-support pre-test tool that maps who is allowed to pulse injectors under the current condition.
ToolFREE
Injector Voltage Drop Logger tools/fuel/injector-voltage-drop-logger-5.html
Standalone SpeedNeeds Injector Voltage Drop Logger for recording injector feed voltage and drop across multiple injectors.
ToolFREE
Prime vs Hold Pressure Comparator v1.0 tools/fuel/prime-vs-hold-pressure-comparator-v1.0.html
Compare prime peak, crank, running pressure, and post-shutdown hold to interpret fuel control/containment patterns without guesswork.
ToolFREE
Residual Fuel Pressure Decay Tool v1.0 tools/fuel/residual-fuel-pressure-decay-tool-v1.0.html
Residual Fuel Pressure Decay Tool v1.0 - capture rail pressure vs time after shutdown and interpret decay patterns.

New Resources

Get new drops in your inbox

Read the Privacy Policy.