SpeedNeeds logo
SpeedNeeds Tool

AFR Target Builder (by Use Case)

Pick induction, fuel, and use. Hit Calculate. You’ll get baseline targets for Idle, Cruise, and WOT plus lambda equivalents. These are starting points — not a substitute for a wideband and knock control.

Stoich AFR depends on fuel composition — what stoich is and why it changes .
Used to classify mild vs high boost (≤10 vs >10).
Reminder: If you’re boosted and you don’t know boost yet, enter a realistic guess. This tool is a baseline — your wideband and logs get the final vote.
Idle AFR
—
λ —
Cruise AFR
—
λ —
WOT AFR
—
λ —
WOT Window
—
Rich safe → leaner power
AFR → λ
—
Using WOT AFR + stoich
λ → AFR
—
Using WOT λ + stoich
Caution
—
Quick note
—
Baseline only
Notes & Formulas

AFR vs Lambda: why lambda works across fuels and AFR does not .

  • λ = AFR ÷ Stoich
  • AFR = λ × Stoich

General rule: Cruise is usually near λ ≈ 1.00 (closed loop). WOT goes richer for cooling and knock margin (gasoline) or for EGT control (diesel).

Boost: This tool classifies mild as ≤10 psi and high as >10 psi for the WOT window selection.

Reference Table (stoich + WOT windows)
FuelStoich AFR
Pump Gasoline14.70
Race Gas (non-oxygenated)14.70
E85 (typical)9.80
Methanol6.40
Diesel (approx)14.50

WOT target windows (baseline)

FuelNA (safe → power)Mild boost ≤10psiHigh boost >10psi
Pump Gasoline12.5 → 13.012.0 → 12.511.5 → 12.0
Race Gas12.8 → 13.212.2 → 12.611.7 → 12.2
E858.4 → 8.78.0 → 8.47.7 → 8.0
Methanol5.4 → 5.65.2 → 5.45.0 → 5.2
Diesel15.0 → 14.015.0 → 14.015.0 → 13.5

These are WOT baselines and assume a typical performance gasoline engine with reasonable IAT control. If you’re on the edge (hot IAT, questionable fuel, weak intercooling), richer is safer.

Get new drops in your inbox

Read the Privacy Policy.