SpeedNeeds / Tool Bundles

Fuel Bundle

Prove the fuel system can feed the engine before it leans out on you.

Three SpeedNeeds tools that size the fuel system to the power you are actually making: the line, the pump and injectors, and the number everybody quotes and few people check.

Founding
$29
Regular
$49
One payment. No subscription. See the offer
Inside the Bundle01 / 03
The fuel line estimator run on a 600 horsepower return system: verdict Borderline, 2.38 psi of pressure drop, the filter named as the biggest restriction, and minimum feed and return sizes recommended
Fuel Line Size & Pressure Drop On a 600 hp return system: verdict Borderline, 2.38 psi of drop, the filter named as the biggest restriction, and the minimum line sizes recommended under it.

01 / The problem

It fails quiet, then leans out at the top.

A fuel system fails quietly. The car runs fine on the street, then goes lean at wide open throttle, at the top of a pull, where lean costs an engine. The cause is usually not one broken part. It is a line a size too small, a pump that was rated on a good day, or injectors running at the edge of their duty cycle, all of it guessed at when the system went together.

The other failure looks just as bad on the invoice. Parts get bought twice, a bigger pump to fix what was really a restriction, new injectors to fix what was really a voltage problem, because nobody ran the numbers on the system as a system.

These three tools are the numbers, run before the parts and before the pull.

02 / How it works

Find the weak link on screen.

Each tool takes one part of the fuel question and works it to an answer. Whether the line itself is choking the flow. Whether the pump and injectors, figured honestly with real world losses, can feed your power target with margin left over. And whether the fuel consumption number attached to your tune is even believable.

You find the weak link on screen, where fixing it is still free.

  • Whether the line itself is choking the flow
  • Whether the pump and injectors can feed your power target
  • Whether the fuel consumption number is even believable

03 / Inside

What’s inside.

Three tools, all of them in the bundle.

The three tools

  • Fuel Line Size & Pressure Drop. estimates the pressure drop in your feed line from flow demand, line size and length, fittings and bends, and filter restriction. It names what is hurting you most and recommends the minimum feed and return sizes for the system you are building.
  • Fuel System Headroom & Safe HP Checker. compares pump capacity and injector capacity against your fuel demand, with the pump figured at real voltage and pressure instead of its best day rating. It exposes the weak link and gives you a Safe HP number with your margin built in.
  • BSFC Reverse Reality Check. works backward. Give it power and fuel flow and it backs into the brake specific fuel consumption, then holds that number up against the sane ranges for your fuel. It catches bad injector data, wrong unit assumptions, and a tune that is richer than you think.

04 / A closer look

What the system tells you.

The headroom checker on a boosted E85 build: pump good for 744 horsepower, injectors for 760, Safe HP 558 with the 25 percent margin built in, and the weak link read as Balanced

02 / Headroom

Can the pump and injectors feed it?

On a boosted E85 build: the pump is good for 744 hp, the injectors for 760, and the Safe HP number lands at 558 with the 25 percent margin built in, the weak link read as Balanced.

The BSFC reverse check on 400 wheel horsepower and 255 pounds per hour of fuel: it backs into 0.542 and the verdict is Normal, looks sane for gas

03 / BSFC check

Is the consumption number believable?

On 400 wheel hp and 255 lb/hr of fuel, the check backs into 0.542, and the verdict is Normal, looks sane for gas. It catches bad injector data, wrong unit assumptions, and a tune richer than you think.

Walkthrough

Watch all three tools run on one build.

The narrated walkthrough is below, running all three tools on one 550 hp build. The screens above are the tools themselves, run on real numbers.

The honest limit, stated plain: these tools work the numbers you give them. The line estimator says on its own screen that your pump curve, regulator, and rail design still matter, and every one of the three shows its math and its assumptions where you can read them. An estimate built on a guessed flow number is a guess, and the tools do not pretend otherwise.

05 / Delivery

Buy it. It is yours.

  1. Buy through My Access.

    Sign in or create a free My Access account. Stripe handles the secure checkout.

  2. Open the bundle.

    After payment, open it from My Access, signed in to your account.

  3. Keep using it.

    Open it through My Access whenever you need it. One payment, and it stays yours, no subscription.

06 / Questions

Before you pay.

Is this a subscription?

No. One payment. The three tools sit in your My Access account and you open them when you need them.

Does it cover E85?

Yes. All three tools carry fuel choices, and E85 and methanol change the math the way they change the car: more volume, different consumption. Pick the fuel you run and the numbers follow it.

I already own a fuel pump. Is this still useful?

That is most of the point. The headroom checker takes the pump you own, at the pressure and voltage it will really see, and tells you the power it can honestly feed. Owning the parts is when the numbers matter most.

What if it is not for me?

The refund terms are on the Terms of Sale and Refund Policy pages. The bundle invents no terms of its own.

07 / The price

One payment.
Yours to keep.

The first 100 founding buyers pay $29. After those 100 purchases, the one-time price is $49.

Founding price
$29
Regular price
$49

Fuel Bundle · $29 founding · $49 regular

Buy the Fuel Bundle

Secure checkout via Stripe through My Access. Tax is figured at checkout. You see the full total before you pay. Access granted after payment.

Also inside All-20 All-Access, the whole shelf in one purchase.

Free tools that run alongside this bundle, free to everyone on the shelf: Fuel Pump Sizing Calculator, Fuel Injector Size Calculator, BSFC Fuel Demand Estimator, E85 Blend Calculator (Tank Math), and E85 Stoich & Fueling Multiplier.