SpeedNeeds / Tool Bundles

All-20 All-Access

The whole shelf, in one purchase, at the best price it will ever carry.

All 14 paid SpeedNeeds tools in one buy: the Automotive Build Planner, the Advanced Suspension Suite, and the Fuel, Boost & Air, and Electrical & Ignition bundles, plus the 6 free tools everyone gets, 20 tools in all. Owning All-20 also takes 50% off future tools.

Founding
$139
Regular
$199
One payment. No subscription. See the offer
Inside All-2001 / 04
The Automotive Build Planner's vehicle record card for a 1989 Mustang GT build, ending in the progress count: 4 of 9 parts installed, 44 percent
The Automotive Build Planner The Planner’s vehicle card: the car at the top of the build, one of the 14 paid tools the purchase carries.

01 / The problem

A build does not stay in one system.

A build does not stay in one system. The engine goes together and the fuel system has to feed it. The boost goes on and the ignition has to light it and the intercooler has to pass it. The suspension comes apart and the geometry has to be set before it goes back. Every stage of the build asks a different question, and the tools that answer them live in different bundles.

Bought one at a time, that walk down the shelf costs more and lands in pieces, with the tool you need next always being the one you have not bought yet. And the shelf is still growing: every future tool that lands on it is another decision, another checkout, at full price.

All-20 ends that. One purchase, the whole shelf, and every future tool at half price from then on.

02 / How it works

The tool is already in your account.

You stop buying tools one question at a time. When the build moves to a new system, the tool for it is already in your account.

The Planner holds the build itself, the suites and bundles cover the engine, fuel, boost, electrical, and suspension numbers, and the half price on future tools means the shelf growing works for you instead of against you.

  • The tool for it is already in your account
  • Every future tool at half price
  • The shelf growing works for you

03 / Inside

What’s inside.

All 14 paid tools, named one by one, plus the 6 free tools.

The Automotive Build Planner

  • The Planner. one tool that tracks every part, every dollar, and every date on your build across seven sections, with budgets that warn you the moment you cross them, a timeline built from your own dates, a full print record, and a VIN read that works on any make.

The Advanced Suspension Suite

Seven phases in one tool.

  • Phase 1, 4-Link Geometry. bar angles, instant center, and anti-squat from your own mount measurements.
  • Phase 2, Travel and Anti-Squat Explorer. how the instant center and anti-squat change as the car squats through its travel.
  • Phase 3, Upper Front Hole Sweep. what each click of the upper front hole does to the geometry before you touch a wrench.
  • Phase 4, Front View Roll Center. where the front roll center lives, its height, its offset, and the roll couple length.
  • Phase 5, 4-Link Comparator. your current setup against the change you are thinking about, side by side, differences shown.
  • Phase 6, Bump Steer. your measured toe change against travel, read near ride height where the car lives.
  • Phase 7, Vehicle Behavior. front camber gain, rear roll steer, and a roll balance read, so handling gets fixed at the right end of the car.

The Fuel Bundle

  • Fuel Line Size & Pressure Drop. the pressure drop in your feed line, what is causing it, and the line sizes the system needs.
  • Fuel System Headroom & Safe HP Checker. pump and injector capacity against your demand, figured honestly, with a Safe HP number and your margin built in.
  • BSFC Reverse Reality Check. backs into your fuel consumption number from power and flow, and catches bad data and rich tunes.

The Boost & Air Bundle

  • Turbo Compressor Map Helper. a sanity checker that works your airflow and pressure ratio against the compressor family’s guardrails, so the wrong turbo gets caught before the buy.
  • Blower Drive Ratio & Air Demand. pulley sizes to drive ratio, blower rpm, estimated boost, and overspeed and heat warnings.
  • Intercooler Flow & Pressure Drop. the pressure drop across your core and the heat soak risk, sized against your goal.
  • 2D VE Table Generator. a baseline VE table, RPM against MAP, out as a CSV your tuning software can take.

The Electrical & Ignition Bundle

  • Ignition Headroom Calculator. the time budget for every spark at your rpm, and the margin you have or are out of.
  • Spark Energy Requirement Calculator. how hard your spark is to jump, from compression, boost, plug gap, and fuel, with a risk rating.
  • Voltage Drop Test Procedure. the test on one printable page, steps, limits by circuit, and what a fail does not prove.
  • Voltage Drop Verdict Calculator. your measured drop against the circuit limit, PASS, HIGH, or FAIL, what it proves, and the next test.
  • Run / Crank Voltage Drop Calculator. feed side and ground side drops totaled, the voltage the part actually gets, checked against run and crank targets.

The free tools, and one honest note

  • The 6 free tools. free to everyone and counted in the 20: Fuel Pump Sizing Calculator, Fuel Injector Size Calculator, BSFC Fuel Demand Estimator, E85 Blend Calculator (Tank Math), E85 Stoich & Fueling Multiplier, and Boost Airflow (CFM) Calculator.
  • Not included. the Compression Suite is sold on its own and is not part of All-20. The 14 above is the whole list, and it is the list on this page.

04 / A closer look

What the tools tell you.

The Advanced Suspension Suite, Phase 1, 4-Link Geometry, after a run: bar angles, instant center, and anti-squat from the mount measurements

02 / Suspension, Phase 1

Where does the instant center sit?

Phase 1 of the Suite, run on real mount measurements: the bar angles, the instant center, and the anti-squat worked out before the car ever leaves the stands.

The Fuel System Headroom and Safe HP Checker after a run, showing the Safe HP number and the margin

03 / Fuel headroom

Can the fuel system feed it?

Pump and injector capacity against the demand, figured honestly, with the Safe HP number and the margin between the two on screen.

The Run and Crank Voltage Drop Calculator after a cranking run: total drop, the voltage delivered, and the verdict against the crank target

04 / Run and crank

What does the part actually get?

Feed side and ground side totaled on a cranking case, and the voltage the part actually gets, checked against the crank target.

Walkthrough

Every product inside carries its own walkthrough.

Each product in All-20 has its own narrated walkthrough on its own page, running the real tools on a real build. Run the free tools first if you want the taste before the meal: they are built to the same standard, and they are free to everyone.

The honest limits, stated plain: the tools work the numbers and measurements you give them, and each one names its own assumptions on its own screen. They answer the questions they are built for. They do not reach into the car, and no tool on this shelf claims to.

05 / Delivery

Buy it. It is yours.

  1. Buy through My Access.

    Sign in or create a free My Access account. Stripe handles the secure checkout.

  2. Open All-20.

    After payment, all 14 paid tools land in your My Access account, and you open them from there whenever you need them.

  3. Keep using it.

    Open it through My Access whenever you need it. One payment, and it stays yours, no subscription.

06 / Questions

Before you pay.

Is this a subscription?

No. One payment. The tools sit in your My Access account and you open them when you need them. There is no monthly charge behind it.

What does 50% off future tools mean, exactly?

Tools that join the shelf after your purchase are half price to All-20 owners. It applies to future tools. It does not apply to the test packs, and it is not a discount on anything already bought.

Why is the Compression Suite not in it?

Because it is sold on its own, by design, and the page says so instead of letting you find out after. If you want compression figured too, it is a separate purchase at its own price.

Do the tools work on my setup?

They run in your browser through My Access, on the numbers from your own car and your own build. There is no car specific version to pick.

What if it is not for me?

The refund terms are on the Terms of Sale and Refund Policy pages. All-20 invents no terms of its own.

07 / The price

One payment.
Yours to keep.

The first 100 founding buyers pay $139. After those 100 purchases, the one-time price is $199.

Founding price
$139
Regular price
$199

All-20 All-Access · $139 founding · $199 regular

Buy All-20 All-Access

Secure checkout via Stripe through My Access. Tax is figured at checkout. You see the full total before you pay. Access granted after payment.