SpeedNeeds Diagnostics Index

Diagnostic Worksheets

Printable and screen-use worksheets for structured proof capture.

Command Center / Tools Library

Start with the symptom

Start from what the car is doing. Everything is still listed below, the way it was.

No crank at all, or just clicks

Battery keeps going dead, or charging light on

Starts, then dies

It only happens sometimes

Search

Direct Working Files

WorksheetFREE
Before-After Diagnostic Capture Worksheet Diagnostics tools/worksheets/before-after-diagnostic-capture-worksheet.html
SpeedNeeds worksheet for recording symptom state before and after one controlled diagnostic change so masking, resets, heat, load, and setup drift do not fake a fix.
WorksheetFREE
Direct Symptom Proof Capture Worksheet Diagnostics tools/worksheets/direct-symptom-proof-capture-worksheet.html
SpeedNeeds worksheet for capturing complaint, locked condition, selected affected system, observation method, evidence quality, and the next controlled diagnostic test.
WorksheetFREE
Returnless pressure control: why the dip is not automatically a weak pump Diagnostics tools/worksheets/returnless-pressure-control-why-the-dip-is-not-automatically-a-weak-pump.html
Why a momentary rail-pressure dip after a demand step can be control-loop lag instead of a weak pump, and how to prove which one you are looking at.
WorksheetFREE
Returnless Demand-Step Capture Worksheet Diagnostics tools/worksheets/returnless-demand-step-capture-worksheet.html
SpeedNeeds worksheet for capturing synchronized returnless fuel-system pressure, pump command, electrical supply, and engine-demand readings through a transient demand step.
WorksheetFREE
Return-Line Restriction Worksheet Diagnostics tools/worksheets/return-line-restriction-worksheet.html
SpeedNeeds worksheet for proving and locating fuel return-line restriction using platform specifications, KOEO, idle and load pressure readings, controlled pinch and vacuum-reference responses, and return-path vent testing.
WorksheetFREE
Relay-Hold Worksheet Diagnostics tools/worksheets/relay-hold-worksheet.html
SpeedNeeds worksheet for proving relay terminal identity, command state, coil/control behavior, and load-side output while a relay is commanded to pull in and remain energized.
WorksheetFREE
Reference-Integrity Worksheet Diagnostics tools/worksheets/reference-integrity-worksheet.html
SpeedNeeds worksheet for auditing fuel-pressure regulator reference integrity with source-locked specifications, B5 verification, idle vacuum and disconnect-rise math, hand-pump tracking, nipple checks, boost comparison readings, observations, and prior verdict capture.
WorksheetFREE
Hot-Event Fuel Capture Worksheet Diagnostics tools/worksheets/hot-event-fuel-capture-worksheet.html
SpeedNeeds proof-first worksheet for correlating hot-event temperature, fuel pressure, command, voltage, timing, and symptom behavior under controlled conditions.
WorksheetFREE
Ground-Map Capture Worksheet Diagnostics tools/worksheets/ground-map-capture-worksheet.html
SpeedNeeds worksheet for mapping ground-point voltage rise through two controlled load steps, recording minimum and maximum excursions, and documenting every unmeasured point.
WorksheetFREE
Symptom Reproduction Worksheet Diagnostics tools/worksheets/symptom-reproduction-worksheet.html
SpeedNeeds worksheet for capturing complaint condition, reproduced condition, repeatability, safety, and observation quality before diagnostic routing.
WorksheetFREE
Crank-No-Start Evidence Capture Worksheet tools/worksheets/crank-no-start-evidence-capture-worksheet.html
A SpeedNeeds diagnostic worksheet for capturing cranking state, combustion evidence, RPM and synchronization clues, fuel and ignition findings, power and ground condition, and the next controlled test during crank-no-start diagnosis.
WorksheetFREE
Crank-to-RUN Transition Capture Worksheet tools/worksheets/crank-to-run-transition-capture-worksheet.html
A SpeedNeeds diagnostic worksheet for recording catch/no-catch behavior, key-release behavior, observation method, and evidence quality during crank-to-RUN transition checks.
WorksheetFREE
Evidence Inventory and Fault Grouping Helper tools/worksheets/evidence-inventory-and-fault-grouping-helper-worksheet.html
SpeedNeeds worksheet for separating symptoms, codes, warnings, failed checks, verified observations, reported-only observations, condition locks, and leftover evidence before choosing a diagnostic path.
WorksheetFREE
No-Crank First-Split Worksheet tools/worksheets/no-crank-first-split-worksheet.html
SpeedNeeds worksheet for safely capturing START observation, starter response, engine rotation evidence, abnormal clues, and the correct first no-crank routing branch.
WorksheetFREE
Recent Service / Reset Intake Worksheet tools/worksheets/recent-service-reset-intake-worksheet.html
SpeedNeeds worksheet for capturing battery disconnect, jump-start, code clearing, programming, calibration, collision, water intrusion, and aftermarket electrical context before warning-light routing.
WorksheetFREE
Starting-System Voltage-Drop Worksheet tools/worksheets/starting-system-voltage-drop-worksheet.html
SpeedNeeds worksheet for recording loaded starting-system voltage drop, crank voltage, cable loss, ground loss, terminal/contact loss, and starter response evidence before condemning parts.
WorksheetFREE
Key-Cycle Before/After Comparison Worksheet tools/worksheets/key-cycle-before-after-comparison-worksheet.html
SpeedNeeds worksheet for comparing an active symptom before key-off, the immediate restart response, and a later comparable-condition recheck without mistaking temporary recovery for a repair.
WorksheetFREE
Key-Cycle Symptom Baseline Capture Worksheet tools/worksheets/key-cycle-symptom-baseline-capture-worksheet.html
SpeedNeeds worksheet for capturing the active symptom, warning state, operating conditions, and exact key-off intervention before a key-cycle recovery test.
WorksheetFREE
Parked Fluid Spot Evidence Logger tools/worksheets/parked-fluid-spot-evidence-logger.html
SpeedNeeds worksheet for recording parked fluid spot freshness, repeatability, vehicle-relative location, odor, color, surface conditions, and wettest-point tracing before classifying a leak.
WorksheetFREE
Repeat Spot Classification Checklist tools/worksheets/repeat-spot-classification-checklist.html
A SpeedNeeds diagnostic worksheet for classifying a repeated parked-fluid mark as an active leak, residue, or insufficient evidence using controlled recheck conditions.
WorksheetFREE
Project Car Budget Triagetools/worksheets/project_car_budget_triage_worksheet.html
Put the build in the right order before the parts pile eats the budget. Identify what blocks progress, price the real work, and choose the next seven jobs you can actually finish.

New Resources

ToolFREE
Coil Feed Voltage-Drop Log Worksheet SpeedNeeds worksheet for proving ignition-coil feed voltage loss under real circuit load, isolating the affected feed segment, and documenting before-and-after repair results.
ToolFREE
Fuse Contact Test Log Worksheet A fuse that looks perfect can still starve its circuit — this worksheet walks a loaded fuse-contact test end to end: lock the fuse and its mapped load, log loaded millivolts at every subdivision point, auto-compute interface resistance (mV ÷ A = mΩ), isolate the failed sub-element with swap and provocation, and document the matched retest.
ToolFREE
Battery Internal Resistance Crank-Sag Worksheet SpeedNeeds worksheet for proving battery internal resistance during cranking from steady-state, time-correlated voltage sag and total current — with rating-scaled bands, two-event agreement, and honest verdict boundaries.
ToolFREE
Interlock Switch Test Log Worksheet SpeedNeeds worksheet for proving the neutral safety / clutch interlock switch at its own terminals — input/output voltage during a live crank request, Park-vs-Neutral repeat, starter-disabled inverse safety test, and one bounded adjustment attempt.
ToolFREE
Slow-Crank Capture Log Worksheet SpeedNeeds worksheet for a slow-crank complaint: lock the battery condition, capture steady cranking voltage against a temperature-adjusted floor, run the draw guard, split per-leg voltage drop during crank, measure starter terminal voltage direct, and screen starter draw — then pick the verdict your evidence supports.
ToolFREE
Fuel Pressure Capture Log Worksheet SpeedNeeds worksheet for a low fuel pressure complaint: prove the gauge reading is real first, capture KOEO prime behavior, idle and load pressures against the SI spec, prove pump voltage at the pump connector before any parts call, record regulator rise, and time the residual leakdown — then pick the verdict your evidence supports.
ToolFREE
Crank-No-Start First-Split Capture Log Worksheet SpeedNeeds worksheet for a crank-no-start complaint at normal crank speed: lock the condition, capture the security-indicator state, the prime-listen result with fuse and inertia-switch state, spark delivery to the tested boot, rail pressure during crank against the SI spec, injector command on two injectors, and crank rhythm — then pick the verdict your evidence supports.
ToolFREE
Click-Pattern Capture Log Worksheet SpeedNeeds worksheet for a repeated-clicking no-crank complaint: lock the click event and burst discipline, capture rest voltage against the 12.4 V gate, click-event burst MINs at the posts against the temperature-adjusted floor, leg peak drops with subdivision readings, S-terminal MIN with the differential check, and post-burst recovery — then pick the verdict your evidence supports.
ToolFREE
Starter Current Draw Capture Log Worksheet A slow crank with a good circuit means the starter motor itself is suspect — but crank speed is not a measurement. This worksheet logs two sustained, zero-corrected cranking-current captures against a stated reference (SI max spec, known-good, or the default band), locks the clamp/battery/circuit conditions first, and isolates a motor fault from engine mechanical resistance before any conclusion is drawn.
ToolFREE
Coil Output Test Log Worksheet Log ignition-coil secondary output at the problem condition — method, gap, and measurement-point lock, suspect-vs-known-good capture log with load-isolation confirmation, and an honest output verdict.
ToolFREE
Crank-Signal Capture Log Worksheet Prove the crankshaft-position signal at the problem cranking condition — circuit-identity and method lock, source-side vs controller-input capture log with check-period requirements (SI vs screening authority) and scan-RPM corroboration, and an honest crank-signal verdict.
ToolFREE
CMP Capture Log Worksheet Log the camshaft position signal's electrical path — CMP design, SI-identified test points, recorded SI requirements, scope settings, and source-vs-controller-input capture log with check-period notes; the verdict is the mechanic's, with the boundary printed on it ("proves the path — never the sensor, never the correlation").
ToolFREE
Dropout Capture Log Worksheet Log intermittent sensor-circuit dropout evidence — method lock, provocation pass log with tool and capture window, return-to-baseline discipline, per-pass leg hypothesis, and matched retest. One pass is suspicion, never a verdict.
ToolFREE
Fuel Pump Prime Observation Log Worksheet Prove the key-on fuel pump prime command at the relay output — relay ID and setup lock, prime-window capture log with same-window feed-vs-output comparison, key-off backfeed and never-terminates screens, relay swap subdivision, and the prime-command verdict with its boundary printed.
ToolFREE
START-EVENT CAPTURE LOG WORKSHEET Prove the ignition feed in START at the scoped test point — circuit-design and setup lock, same-event source and feed capture log with the repeat gate, instability record, interpreted-input state check, and the START-feed verdict with its boundary.
ToolFREE
Cam/Crank Correlation Evidence Log Worksheet Prove what is behind a proved cam/crank correlation failure — freshness and SI correlation-rule lock, crank- and cam-signal content screens at the controller input, phase-offset judgment against the SI window across two independent sightings, the VVT park test, and an honest correlation verdict.
ToolFREE
Battery State-of-Charge Log Worksheet Prove a battery's state of charge before cranking tests mean anything — battery and measurement-method lock, sanctioned surface-charge removal with disclosed bias directions, post-to-post rest-voltage log against the chemistry's OCV map with the 75% adequacy bar, hydrometer corroboration with a 0.050 spread veto, and a verdict that prints the health caveat on it.
ToolFREE
Ignition Switch START Output Log Worksheet Prove the ignition switch START output at the switch terminal — topology and method lock (relay-driven lamp-loaded / solenoid-direct live-attempt / module-mediated), SI wire identity with the 150–400 mA lamp discipline, loaded feed + output capture with the direct across-contact drop, hot-only-in-START discipline, jiggle repeat, and an honest delivery verdict with the downstream boundary printed on it ("proves delivery at the switch terminal — not the interlock, relay, or starter").
ToolFREE
Intermittent No-Crank Capture Log Worksheet Catch the no-crank or slow-crank that only happens sometimes — condition-lock interview with written when/what, per-occurrence pattern log with failing-now routing hints, static inspection + crimp-flex, twice-reproduced key-on provocation record measured across the joint itself, a two-tier capture kit for the next failure, and a watch-interval tracker that stays open until the evidence closes it.
ToolFREE
Coil Power Capture Log Worksheet Log the coil primary power evidence gate by gate — KOEO presence, sustained-crank battery, current demonstration, differential MAX on both cranks, stability watch, and the source record.
ToolFREE
Module Output Capture Log Worksheet Log the module driver output evidence card by card - pin ID, command state, supply and ground under load, output voltage no-load and loaded with current demonstrated, and the load-terminal proof. The sheet computes the loaded vs no-load collapse delta; you own the verdict.
ToolFREE
Loaded Fuel Delta-P Worksheet Record the loaded fuel filter restriction test — filter inlet and rail pressure captured under the same pull, with the sheet computing the delta-P against the service-information limit on every pull and checking the two-pull agreement. The sheet computes the math; you own the verdict.
ToolFREE
Loaded Return-Side Worksheet Record the loaded return-side fuel test: the rated-hold spec from service information, stock pulls vs free-return pulls in A-B-B-A order, and rail PSI at idle and load per pull. The sheet computes regulator tracking, hold-vs-spec bands, repeat agreement, and the pull-to-pull separation that splits regulator behavior from pump capacity — the verdict is the mechanic's.
ToolFREE
Segment Isolation Walk Log Worksheet Walk a circuit one segment at a time and log it in test order — walk boundaries, readings at each boundary, and current-signature checks — with per-segment differentials computed, so the fault's home segment is proved and the path can be retraced.