SpeedNeedsSpeedNeeds Diagnostics
Worksheet Fluid Evidence Leak Classification

Repeat Spot Classification Checklist

Classify a repeated parked-fluid mark as an active leak, residue, or insufficient evidence by controlling the surface, parked condition, elapsed time, and source-path evidence.

Core rule

A spot is not proof of an active leak until fresh fluid reappears or progresses under a controlled, comparable recheck.

Use this after a parked-fluid mark has been logged, after cleaning a suspected source area, after a repair, or anytime an old stain, splash, trapped fluid, or undertray residue may be mistaken for an ongoing leak.

Safety / evidence gate

Do not touch, smell closely, or road-test around an unknown hazardous fluid. Fuel, brake fluid, hot coolant, pressurized fluid, or fluid reaching tires, brakes, belts, exhaust, or electrical components requires a safety-first inspection before continued operation.

1Vehicle / Job Information

Start clean

2Repeat Check Condition Lock

Comparable or inconclusive

Lock the recheck setup before interpreting the mark. A different parking surface, vehicle position, temperature state, or parked time can create a false comparison.

3Original Mark Reference

Name what is being compared

4Repeat Spot Capture

Record before interpreting

5Active-Leak vs Residue Separation

Trace the wettest point

Evidence Supporting an Active Leak

Check only what was directly observed during this controlled recheck.

Evidence Supporting Residue / Carryover

Residue evidence can explain the mark, but it does not prove the system is sealed.

6Drift / Safety / Evidence-Quality Check

Catch the false call
Hard stop: Do not continue operating the vehicle when fluid may reach a tire, brake friction surface, steering component, belt, hot exhaust, high-current electrical connection, or when fuel, brake fluid, or a major coolant loss is suspected.

7Final Classification

Choose only what the evidence supports
Boundary: “Residue” means the controlled repeat check did not support an active release from the inspected area. It does not prove every seal, hose, fitting, vent, drain, or system is leak-free. “Active leak” identifies ongoing release evidence; it does not identify the failed component unless the source point and failure path were directly proven.

8Release / Routing Check

Do not close it weak

Get new drops in your inbox

Read the Privacy Policy.