1Vehicle / Job Information
Start clean2Starting Condition / Target Lock
Lock the symptom3Setup / Reference Data
Loaded onlyBattery Reference
V
Meter / Lead Setup
Crank Method
Safety Setup
4Loaded B+ Side Voltage Drop
Feed pathTotal positive feed dropBattery positive post to starter B+ stud during START.
V
Positive post to terminal clampFinds corrosion or poor contact between post and terminal.
V
Positive cable end-to-endBattery positive terminal/cable end to starter cable end.
V
Solenoid / relay main contactsMain input terminal to output terminal under crank load.
V
Starter B+ stud connectionCable lug to starter B+ stud / nut contact under crank load.
V
5Loaded Ground Side Voltage Drop
Return pathTotal starter ground dropStarter case or starter ground point to battery negative post during START.
V
Starter case to engine blockChecks starter mounting contact, paint, corrosion, loose bolts, or adapter plate loss.
V
Engine block to battery negative cable endChecks engine ground cable or ground strap under crank load.
V
Negative post to terminal clampFinds poor contact between negative post and terminal.
V
Chassis / body ground contributionOnly use if the starting path depends on chassis/body ground, relocation wiring, or added straps.
V
6Crank Voltage / Attempt Log
Available voltageAttempt 1
V
V
Attempt 2
V
V
Attempt 3
V
V