SpeedNeedsSpeedNeeds Diagnostics
Worksheet No-Crank First Split

No-Crank First-Split Worksheet

Capture safe START observation, starter response, engine rotation, abnormal evidence, and the branch selected before the diagnostic path gets polluted.

Core rule

Do not diagnose fuel, spark, injector pulse, or security until engine rotation is verified.

Use this worksheet when a vehicle will not start and the first job is to prove whether the starter is commanded, whether the starter responds, and whether the crankshaft actually turns.

Safety first split

Secure the vehicle before any START attempt. Stop if there is smoke, arcing, heat, battery odor, fluid spray, violent movement, grinding, or any condition that makes another attempt unsafe.

1Vehicle / Job Information

Start clean

2Safe START Setup Lock

No loose attempts

Lock the setup before the first observation. A no-crank split is only useful if the vehicle state is controlled and repeatable.

Hard stop: If the vehicle cannot be secured, do not continue the START capture. Fix the safety problem first.

3Safe START Observation Capture

Observe before testing

Capture what happened during controlled START attempts. Do not crank repeatedly just to fill the sheet. One clean observation beats five cooked ones.

Attempt 1

Attempt 2

Attempt 3 / Repeat Check

Evidence trap: Starter noise is not engine rotation. The branch changes only when crankshaft rotation is actually verified.

4Starter Response vs Engine Rotation Split

Separate the families

Use this section to separate a true no-crank from a starter engagement problem or a crank/no-start. This is the branch gate.

5Abnormal Evidence / Hard Stop Capture

Do not cook it

Abnormal evidence can outrank the normal split. Capture it before more attempts erase the clue or create a second problem.

Hard stop rule: Do not keep hitting START to “see what happens” if heat, smoke, arcing, fuel smell, grinding, or lock-up evidence shows up.

6Drift / Safety / Quality Check

Protect the evidence

Mark anything that changed during capture. Changed conditions can make the selected branch weak.

7Selected Branch / Next Action

Route clean

Select one branch only when the evidence supports it. If the evidence is weak, choose inconclusive instead of forcing the wrong lane.

Minimum defendable proof

Selected branch must match the actual START response and the engine rotation evidence captured above.

Do not cross the boundary

If engine rotation is not confirmed, do not move into fuel, spark, injector pulse, cam/crank sync, or start-and-stall testing.

Boundary: This worksheet controls the first no-start split. It does not replace service information, wiring diagrams, scan data interpretation, safe procedures, or professional judgment.

Get new drops in your inbox

Read the Privacy Policy.