SpeedNeeds Diagnostics Index

Ignition

Spark energy, coil types, timing, dwell, knock, and ignition failure behavior.

Command Center / Tools Library

Read the Privacy Policy.

Start with the symptom

Start from what the car is doing. Everything is still listed below, the way it was.

Cuts out or misfires under load

No spark at all

Engine keeps running with the key off

Search

Direct Working Files

ToolFREE
Dwell Time Calculator tools/ignition/dwell-time-calculator-v1.html
This tool estimates dwell limits by RPM based on time per spark event, coil saturation time, and voltage. It helps you spot where dwell collapses and misfire shows up first. No...
ToolFREE
Ignition Cutout Pattern Identifier v1.2.1 • SpeedNeeds tools/ignition/ignition-cutout-pattern-identifier-v1.2.1.html
Identify likely ignition cutout categories from observed patterns (tach behavior, duration, load/heat dependency, recovery, and warning signs). Decision-support only.
ToolFREE
Ignition Keep-Alive / Run-On Fault Identifier tools/ignition/ignition-fault-identifier-keepalive-runon-v1.0.html
Post-test pattern matcher that flags the most likely ignition keep-alive/run-on fault class from simple yes/no observations.
ToolLockedElectrical & Ignition Bundle, $9 founding
Ignition Headroom Calculator tools/ignition/ignition-headroom-calculator-v1.html
This tool checks if you are running out of time per spark event. Inductive systems are limited by coil charge time (dwell). CDI systems are limited by box recharge time and...
ToolFREE
Ignition Command Logic Mapper tools/ignition/ignition-logic-mapper-spark-command-v1.0.html
Decision-support pre-test tool that maps who is allowed to create spark under the current condition.
ToolLockedElectrical & Ignition Bundle, $9 founding
Spark Energy Requirement Calculator tools/ignition/spark-energy-requirement-calculator-v1.html
This is a reality check tool. It estimates a relative spark demand based on cylinder pressure and plug gap. Use it to decide if you have a wiring/parts problem or an ignition...
ToolFREE
Spark Plug Gap vs Cylinder Pressure Tool tools/ignition/spark-plug-gap-vs-cylinder-pressure-tool-v1.html
This tool recommends a plug gap range based on a simple cylinder pressure factor. Higher pressure needs a tighter gap. Use this to stop guessing when boost, nitrous, or...
ToolFREE
Timing Scatter Estimator tools/ignition/timing-scatter-estimator-v1.html
Timing scatter is how much the actual spark timing jitters around the commanded value. This tool estimates scatter from common mechanical and signal contributors: distributor...

New Resources

Get new drops in your inbox

Read the Privacy Policy.