- Enter compression, boost, and nitrous percent (0 ok).
- Pick fuel and ignition strength.
- Hit Calculate. Start with the recommended range, then validate with real-world logs.
SpeedNeeds Tool
Spark Plug Gap vs Cylinder Pressure Tool
This tool recommends a plug gap range based on a simple cylinder pressure factor. Higher pressure needs a tighter gap. Use this to stop guessing when boost, nitrous, or compression goes up. No auto-calc.
Static compression ratio (10.5 means 10.5:1).
Use 0 for naturally aspirated.
Simple pressure add factor. Not jet size.
Fuel multiplier is a light heuristic.
CDI can usually hold a wider gap at the same pressure.
Pick the baseline you want to scale from.
Used only for a compare note.
Internal math uses inches, outputs show both.
Not used in math. Logging only.
Not used in math. Copy/paste friendly.
Pressure factor
-
Relative to a mild NA baseline
Recommended gap
-
-
Suggested range
-
-
Compare note
-
-
How to use this (quick)
Notes and formulas (what the math is doing)
This is a practical scaling model. It does not claim exact kV. It answers: as pressure rises, how much should the gap come down to avoid spark blowout?
Pressure factor:
MAP_factor = 1 + (boost_psi / 14.7)
CR_factor = (CR / 9.0) ^ 1.30
N2O_factor = 1 + (nitrous_percent / 100)
Fuel multiplier (light heuristic):
gasoline = 1.00
E85 = 1.05
methanol = 1.08
Ignition multiplier (more strength = lower effective demand):
stock_inductive = 1.00
strong_inductive = 0.92
CDI = 0.85
Effective factor:
eff = pressure_factor * fuel_multiplier * ignition_multiplier
Gap recommendation (scaling rule):
gap_rec_in = base_gap_in / sqrt(eff)
Clamp and range:
clamp gap_rec_in between 0.016 and 0.050
range = gap_rec_in +/- 0.004 in
If you are still breaking up with a tight gap, stop blaming the plug first. Check voltage drop, coil power/ground, and dwell/headroom.
Stay in the loop
Get new drops in your inbox
New QTS builds, tools, and garage stories — straight to your inbox. No spam. Unsubscribe anytime.
Read the Privacy Policy.