SpeedNeeds logo
SpeedNeeds Tool

Vehicle Speed & RPM Calculator

Enter tire size, final drive, and transmission gear ratios. Choose Engine RPM or Vehicle Speed, then hit Calculate. You’ll get tire diameter, revs per mile, and per-gear results.

Rear gear / diff ratio. Transmission ratios go below.
Used only for Shift Analysis (RPM drop between gears).
Tip: If you don’t care about shift drop, leave it blank.
Tire diameter
—
inches
Revs per mile
—
rev/mi
Gear 1
—
mph
Gear 2
—
mph
Gear 3
—
mph
Gear 4
—
mph
Gear 5
—
mph
Gear 6
—
mph
Gear 7
—
mph
Gear 8
—
mph
Status
Ready
no auto-calc
Quick tip
Enter key
runs Calculate
Shift Analysis (RPM drop between gears)

Uses your Shift RPM value and your gear ratios to estimate what RPM you’ll land at after each shift.

Enter inputs and hit Calculate.
Notes & Formulas
Tire Diameter(in) = 2 × (section_width/25.4) × (aspect_ratio/100) + rim_diameter
Revs per Mile = 63360 / (π × tire_diameter)
Vehicle Speed(mph) = (RPM × tire_diameter × π) / (gear_ratio × final_drive × 1056)
Engine RPM = Speed × gear_ratio × final_drive × 1056 / (tire_diameter × π)

Assumes no converter/driveline slip. “Gear ratio” here means the transmission gear for that gear. Final drive is separate.

Get new drops in your inbox

Read the Privacy Policy.