SpeedNeeds logo
SpeedNeeds Tool

Throttle Body Sizing Calculator

Two ways to size a throttle: HP Guided (quick practical pick) or Airflow Guided (CID/RPM/VE math). Nothing runs until you hit Calculate.

Tip: HP Guided is the real-world pick. Airflow Guided shows the theoretical minimum based on your airflow demand.
Units: HP

Results

—
Recommended throttle size
— mm
— inches
Blade style
—
—
Estimated airflow demand
— CFM
Shown when using Airflow Guided
Theory bore (airflow math)
— mm
— inches raw
Nearest common size
— mm
Options: 65, 70, 75, 80, 90, 95, 102, 105, 112, 120
Why this might look “too big”
Airflow mode gives a theoretical minimum. Real throttle bodies are tapered/radiused and often flow like a bigger number on paper.
Mode used
—
—
Reminder
If it drives like a light-switch, the throttle may be oversized for the combo (and the tune).
Beginner’s quick guide
  • Street NA: use HP Guided unless you’ve got oddball parts or want to sanity-check with airflow.
  • Boosted: expect to bump one size up for headroom.
  • Airflow Guided: if the calculated bore seems huge, that’s normal. Use the Nearest common size plus the practical HP guide.
  • No auto-calc: fill fields, then hit Calculate.
Recommended throttle body sizes
Notes & formulas

Airflow (CFM): CFM = (CID × RPM × VE) ÷ 3456 × (1 + Boost/14.7)

Throttle diameter (in): D = √( (CFM/60 ÷ Velocity) × 4 × 144 ÷ π )

Bias indicator: In Airflow mode, it compares the nearest common size to the calculated bore. Smaller than the math can mean restriction at the top end; much larger can feel touchy on the street.

Real-world warning: Throttle bodies vary a lot by design. A “90mm” from one brand can flow like a “95–102mm” from another. Use this as a baseline, then look at published flow and your combo.

Get new drops in your inbox

Read the Privacy Policy.