SpeedNeeds logo
SpeedNeeds Tool

Air Filter Restriction Calculator

Cheap filters choke engines and nobody checks. Enter airflow and filter size, then hit Calculate for an estimated pressure drop and a straight verdict.

Tip: Use your peak airflow (WOT / peak RPM). Bigger number = harsher truth.
Type changes the restriction factor: paper usually drops more, cotton flows better, foam can be restrictive.
Cone = common under-hood filters. Panel = airbox style (flat face area).
Estimated Pressure Drop
—
inH₂O
Effective Filter Area
—
sq in
Recommended Minimum Area
—
sq in (targets ≤ 1.5 inH₂O)
Verdict
—
Notes & Formulas

This is a sanity check, not a lab test. It’s built to catch filters that are obviously too small for the airflow you’re asking for.

Cone area (sq in) = π × diameter × length
Panel area (sq in) = width × height × pleat_factor

Drop model (relative) = (CFM / Area)² × type_factor × K
K = 12 (calibration constant for “ballpark” inH₂O)
Recommended min area solves Drop ≤ 1.5 inH₂O

Restriction bands: < 1.5 OK • 1.5–3.0 Borderline • > 3.0 Too small / choking.

Get new drops in your inbox

Read the Privacy Policy.