SpeedNeeds Diagnostics Index

Engine Mechanical

Command Center / Explainers Library

Start with the symptom

Start from what the car is doing. Everything is still listed below, the way it was.

Cranks like it has no compression

Burns oil, smokes, or has blow-by

Down on power

Folders and Files

Folder2 files
Camshaft EffectsSpeedNeeds diagnostic support files in this folder.
Folder2 files
CompressionSpeedNeeds diagnostic support files in this folder.
Folder3 files
Failure ModesSpeedNeeds diagnostic support files in this folder.
Folder2 files
Friction And LossesSpeedNeeds diagnostic support files in this folder.
Folder1 file
SealingSpeedNeeds diagnostic support files in this folder.
Folder2 files
Valve EventsSpeedNeeds diagnostic support files in this folder.
QYS
QYS-GEN-20 Rough Idle and Low Vacuum Are Not Proof the Camshaft Is the CauseA SpeedNeeds QYS diagnostic asset explaining why rough idle, low manifold vacuum, weak cranking compression, or poor low-speed response do not prove the camshaft owns the fault.
Explainer
Camshaft EffectsSpeedNeeds diagnostic support file.
QYS
QYS-GEN-21 A Compression Reading Is Not Proof of Which Part FailedA compression reading proves cylinder pressure under the test conditions. It does not identify rings, valves, head gasket, timing, or another failure source.
Explainer
CompressionSpeedNeeds diagnostic support file.
QYS
QYS-GEN-17 A Blocked State Transition Is Not Proof the Final Component FailedAn inactive final component proves only that the expected system result was not achieved. Trace requested, recognized, authorized, commanded, delivered, and achieved states before condemning the load.
QYS
QYS-GEN-22 A Mechanical Symptom Is Not Proof of Which Internal Part FailedA SpeedNeeds QYS diagnostic asset explaining why a mechanical symptom identifies a failed engine function before it identifies the internal part that caused it.
Explainer
Engine-Mechanical Failure ModesSpeedNeeds diagnostic support file.
QYS
QYS-GEN-23 High Drag Is Not Proof of Which Internal Engine Part Is FailingHigh drag, slow cranking, heat, or reduced output proves that work is being consumed. It does not prove the loss is internal or identify the failed engine part.
Explainer
Friction and LossesSpeedNeeds diagnostic support file.
Explainer
SealingSpeedNeeds diagnostic support file.
QYS
QYS-GEN-25 Timing Marks and Cam Commands Are Not Proof of the Actual Valve EventWhy aligned timing marks, accepted cam commands, plausible cam correlation, or visible valve movement do not prove the complete achieved valve event.
Explainer
Valve EventsSpeedNeeds diagnostic support file.

New Resources

Get new drops in your inbox

Read the Privacy Policy.